40
Citadel Bed Frame System
Weighing Units
On select models, weight readings can be viewed in pounds or kilograms by
pressing the Select Units button. An indicator LED next to the display will light to
show the selected units (lb or kg), if equipped.
To lock the Select Units button so that the display always shows readings in
either pounds or kilograms, if equipped:
1. Hold down the Function Lockout button.
2. Press and hold the Select Units button. Keep both buttons pressed
until you hear an audible tone. Check that the required indicator LED is
illuminated (lb or kg), if equipped.
Normal operation of the Select Units button can be restored by repeating this
procedure.
Auto Compensation
The Auto Compensation function allows weight (up to a maximum of
100 kg [220 lb]) to be added to or removed from the bed, without affecting the
indicated patient weight.
1. With the patient lying on the bed, press the Auto
Compensation button once.
2. The display will show a moving circular pattern until a
stable weight reading is obtained.
3. The display will read AUTO to indicate that the system is in
Auto Compensation mode.
4. Add or remove accessories, bed linen, pillows, etc. as
required.
5. Press the Auto Compensation button again.
6. The display will show a moving circular pattern for a few
seconds then revert to showing the patient’s weight.
