Arjohuntleigh citadel Instructions For Use Manual Download

Page: 21 / 76

Citadel Bed Frame System

Citadel Patient Therapy System Connections

The following connections are provided for attaching a

Citadel

Patient Therapy

System to the

Citadel

Bed Frame System. More details on proper connection can

be found in the

Citadel

Patient Therapy System Instructions for Use.

Figure 8: Citadel Patient Therapy System connections

For attachment to Citadel Patient Therapy System only. Refer

to Citadel Patient Therapy System Instructions for Use for more

information.

•

Pneumatic (air) hoses - Air hoses attach straight across from the frame

to the air mattress control unit in order from left to right / right to left

•

Communications cable / connection

•

CPR Switch connection

•

AC Power cable connection

Mattresses

Always use a mattress of the correct size and type. Incompatible

mattresses can create hazards.

Where the maximum patient weight specified for the mattress is

different to that specified for the bed, the lower value applies.

When choosing bed and mattress combinations, it is important to consider the

use of side rails based on clinical assessment of each individual patient and in

line with local policy.

When assessing the suitability of a mattress for use with side rails, the following

factors should be considered:

Air Hoses

Communications Connector

CPR Switch Connector

AC Power Connector

Summary of Contents for citadel













































































Search results

Summary of Contents for citadel

Reviews:

Related manuals for citadel

Brands by name

Popular brands

Arjohuntleigh citadel, Instructions For Use Manual

Search results

Summary of Contents for citadel

Reviews:

Related manuals for citadel

Brands by name

Popular brands