Arjo KWIKtrak 4-Post, Assembling Instructions

Page: 12 / 28

12
Assembling Instructions
• Tighten the M6 x 10 HC screws to a torque of 4 N
•
m (3 lbf
•
ft).
Fig. 7
End Stoppers
5. End stoppers must be securely positioned in various places within the Semi-Permanent
Rack system. These stoppers:
• prevent collisions between the mobile XY track and the corner brackets;
• make the installation safer by greatly reducing the risk of the mobile track shifting from
its position in the event that the end of the track should be subjected to a violent impact;
• prevent the installed track lift from falling from either end of the mobile track.
Follow these assembly instructions carefully and refer to Figures 9 to 20 for the installation of
the end stoppers.
Torque both
screws to 4 N
•
m
(3 lbf
•
ft)
Turn
clockwise to
raise post.
Maximum
elevation:
25,4 mm (1 in)