Arjo KWIKtrak 4-Post, Assembling Instructions

Page: 19 / 28

19
Assembling Instructions
Inserting the Track Lift into the Mobile Track
Once the XY mobile track has been properly mounted and secured:
23. Position the first end stopper at the edge of the mobile track. Secure the end stopper
according to the following procedure (see Fig. 18).
• Attach the U-clip connected to the end stopper to the track.
• Insert the end stopper into the track and test the end stopper by trying to push it back out
of the track. The stopper should not be able to move.
• Firmly tighten the setscrews using a 6 mm Allen key. The end stopper is now installed.
• Slide the lift or portable trolley into the mobile track (see Fig. 19).
24. Insert the second stopper into the mobile track. Secure the end stopper according to the
same procedure listed above.
Fig. 18
25. Install the plastic end cap at each end of the mobile track (see Fig. 20).