Arjo KWIKtrak 4-Post, Assembling Instructions

Page: 10 / 28

10
Assembling Instructions
Assembling the 4-Post Rack
Post Assembly - Corner Brackets
Each set of pressure plates are assembled to the corner brackets prior to delivery.
1. Please verify the following (see Fig. 4):
• Check if pressure plates are attached to the corner bracket with two M12 x 30 socket
low-head bolts.
• Verify that the lockwashers are installed at their proper place as shown.
Fig. 4
2. Fasten the corner bracket assembly to the top of each post. Do so for all four posts.
• Properly insert the two screws (M10 x 75 HEX) through the post and tighten to a torque
of 20 N
•
m (15 lbf
•
ft). Secure them with the corresponding locknuts using a 17 mm socket
tool or hexagonal key.
• Verify that the lockwashers are installed at their proper place as shown.
NOTE: At this stage, there is no need to tighten this part of the assembly.