15
Assembling Instructions
Fig. 12
11. Slide the four individual autolock end stoppers towards the four ends of the two parallel
tracks, to prevent the mobile XY track from running into any of the corner brackets.
12. Tighten the setscrews on the end stoppers using a 6 mm Allen key. Make sure that the
lockwashers are installed in their correct positions.
13. Insert the white plastic caps onto the ends of the 4 tracks.
Levelling the assembly
14. Place a bubble level on one of the horizontal tracks.
15. The first person can raise the posts from the ground while the other adjusts the level by
rotating the bottom of the levelling feet until the horizontal track is perfectly horizontal.
16. Move the bubble level to the next horizontal track and repeat these steps until the entire
rack is perfectly levelled.
CAUTION: Make sure that the lockwashers are installed at the proper locations.
8 mm Allen key
NOTE: You must level the assembly before mounting the mobile track to the system.
Two people are needed to level the Semi-Permanent Rack system.
Do not place hands under the posts. Grab the levelling feet by the side to prevent the
risk of fingers being pinching when performing adjustments.
Do not force the levelling feet to extend beyond their maximum adjustable height of
25,4 mm (1 in).
Summary of Contents for KWIKtrak 4-Post
Page 24: ...Intentionally left blank...
Page 25: ...Intentionally left blank...
Page 26: ...Intentionally left blank...