Arjo Huntleigh Sonicaid Team3 USA Instructions For Use Manual Download Page 84

Page: 84 / 84

1001048-3

Registered No: 942245 England & Wales. Registered Office:

ArjoHuntleigh House, Houghton Hall Business Park, Houghton Regis, Bedfordshire, LU5 5XF

©Huntleigh Healthcare Limited 2016

A Member of the Arjo Family

® and ™ are trademarks of Huntleigh Technology Limited

As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice.

If a serious incident occurs in relation to this medical device, affecting the user, or the patient then the user or

patient should report the serious incident to the medical device manufacturer or the distributor.

In the European Union, the user should also report the serious incident to the Competent Authority in the

member state where they are located.

Manufactured in the UK by Huntleigh Healthcare Ltd on behalf of;

Huntleigh Healthcare Ltd.

35 Portmanmoor Road, Cardiff, CF24 5HN, United Kingdom

T: +44 (0)29 20485885 [email protected]

www.huntleigh-diagnostics.com

ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden

www.huntleigh-healthcare.us/

www.huntleigh-diagnostics.com/

Distributed in the USA by:

ArjoHuntleigh, Inc.

2349 West Lake Street, Suite 250

Addison, IL 60101

800-323-1245

www.huntleigh-healthcare.us

1001057-2

Summary of Contents for Huntleigh Sonicaid Team3 USA





















































































Search results

Summary of Contents for Huntleigh Sonicaid Team3 USA

Reviews:

Related manuals for Huntleigh Sonicaid Team3 USA

Brands by name

Popular brands

Arjo Huntleigh Sonicaid Team3 USA, Instructions For Use Manual

Search results

Summary of Contents for Huntleigh Sonicaid Team3 USA

Reviews:

Related manuals for Huntleigh Sonicaid Team3 USA

Brands by name

Popular brands