Arjo Huntleigh Sonicaid Team3 USA Instructions For Use Manual Download Page 47

Page: 47 / 84

Instructions For Use

Printed Indicators

• Fetal alarms
• Maternal alarms

ULT1 and ULT2 Fetal High Heart Rate

ULT1 and ULT2 Fetal Low Heart Rate

ULT1 and ULT2 Fetal Signal Loss

Maternal High Heart Rate

Maternal Low Heart Rate

Maternal Systolic High Alarm

Maternal Systolic Low Alarm

Maternal Diastolic High Alarm

Maternal Diastolic Low Alarm

Toco Persistence Alert

Alarm(s) Acknowledged

8.3 Responding to alarms

Type of alarm

Recommended user response

Signal outside range

Acknowledge alarm
Responsible clinician to decide what action to take

Loss of signal

Acknowledge alarm, if appropriate
For FHR: reposition the transducer
For other parameters: check transducer attachment and connections

Fetal Cross Channel

Re-position transducers if required.

8.4 Controlling alarms

There are four ways of controlling alarms:

• Acknowledge (i.e. silence) it when it occurs.
•

Switch it off, so that it is never triggered.

• Alter thresholds so that it occurs more frequently or less frequently.
• Alter the volume of the audio alarm.

Switching alarms off, changing thresholds or volume

See Section 5.3.7 - Settings - Alarm Settings.

Note: To test the alarms, run Demo mode (see section 13.5) and wait until an alarm is triggered. All

Alarms are of Medium priority and so any input will provide confirmation of a working Alarm system.

Summary of Contents for Huntleigh Sonicaid Team3 USA





















































































Search results

Summary of Contents for Huntleigh Sonicaid Team3 USA

Reviews:

Related manuals for Huntleigh Sonicaid Team3 USA

Brands by name

Popular brands

Arjo Huntleigh Sonicaid Team3 USA, Instructions For Use Manual

Search results

Summary of Contents for Huntleigh Sonicaid Team3 USA

Reviews:

Related manuals for Huntleigh Sonicaid Team3 USA

Brands by name

Popular brands