USA MAV500/MKVI Service Manual
Bill Acceptor
9.3.1 Clearance of Embedded Bill Acceptor Stacker
The procedure for the clearance of bills from the bill acceptor stacker will be strictly
controlled by the house.
The stacker unit and the bill acceptor unit can be accessed and removed
independently.
9.3.2 Removing Bill Acceptor Stacker
To remove the stacker:
1.
Open the gaming machine belly panel door. The machine lockup Bill Acceptor
Door Open occurs.
2.
Unlock and open the stacker cage door. Pull the top of the cage door down and
forward.
3.
Withdraw the stacker from the machine.
4.
After the stacker is withdrawn, the stacker door must be unlocked before the
bills can be withdrawn. Each stacker may be numbered to assist accounting
and control operations.
5.
The stacker is replaced by inserting into position through the belly panel door.
6.
Close the cage door and lock if lock(s) are fitted.
9.3.3 Removing Bill Acceptor
To remove the bill acceptor:
1.
Open the gaming machine main door.
2.
Turn OFF the power.
3.
Grasp the handle on the front of the bill acceptor head.
4.
Pull forward until the bill acceptor is free of the mounting.
28-00486-00
9-15
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved.
© Copyright (ATI) Aristocrat Technologies, Inc. 2002.
