USA MAV500/MKVI Service Manual
Coin Chute Assembly
28-00486-00
6-15
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved.
© Copyright (ATI) Aristocrat Technologies, Inc. 2002.
DIVIDER
SCREW
CONNECTORS
SOLENOID
SOLENOID
SCREW
DIVIDER
COVER
ACCEPT
GATE
SPRING
ACCEPT
GATE
HINGE
Figure 6-7 Condor Validator – components
Removal of the Accept Gate and the Divider Piece
•
Remove the two connectors from their sockets, using long nosed pliers, (
do not
pull them out by the wires ).
•
Remove the divider screw (in large coin builds, a metal ring is fitted in the body
under the screw), taking care not to lose the ring (if fitted). Refer to Figure 6-7.
•
Insert a thin edged screwdriver level with the hinge, far most left of the hinge,
between the body and the divider section, and pry up the divider section and
remove. Refer to Figure 6-8.
•
In small coin builds there is a coin deflector inserted on the bottom left-hand side
of the body. Take care not to lose this piece. Refer to Figure 6-9.
CONNECTORS
