Page 2-41
0040506004 0919
Operating and installation instructions
Thrust actuator ARI-PACO
®
2G 1,6D/Y
12.0 Translated Declaration of Incorporation and Conformity
ARI-Armaturen
Albert Richter GmbH & Co. KG
Mergelheide 56-60, D-33758 Schloß Holte-Stukenbrock, www.ari-armaturen.com
Translated Declaration of Incorporation of Partly Completed Machinery
EC-directive 2006/42/EC and EC-/EU declaration of conformity
as defined by the EC-directive about electromagnetic compatibility 2004/108/EC,
the EU-directive about electromagnetic compatibility 2014/30/EU,
the EC-Low voltage directive 2006/95/EC,
the EU-Low voltage directive 2014/35/EU
and the EU-directive 2011/65/EU (RoHS II)
for the supplied model of ARI electric thrust actuators:
• ARI-PACO 2G
• ARI-PREMIO
• ARI-PREMIO-Plus 2G inclusive accessories
ARI-Armaturen GmbH & Co. KG as facturer herewith declares, that the products mentioned above meet the
following basic requirements of the Machinery Directive (2006/42/EC):
Annex I, articles 1.1.2, 1.1.3, 1.1.5, 1.2.1, 1,2,2, 1.2.6, 1.3.2, 1.3.4, 1.3.7, 1.3.8, 1.5.1, 1.5.2, 1.5.3, 1.5.4,
1.5.5, 1.5.6, 1.7.1, 1.7.3, 1.7.4
The following harmonised standards have been applied:
• DIN EN ISO 12100: 2011-03 + Berichtigung 1: 2013-08
• EN 60204-1: 2006
ARI-thrust actuators are designed for assembling with valves.
ARI-thrust actuators must not be put into service until the final machinery, into which they are to be incorpora-
ted has been declared in conformity with the provisions of the EC Directive 2006/42/EC.
The relevant technical documentation pertaining to the machinery described in Annex VII, part B has been
prepared. With regard to the partly completed machinery, the manufacturer commits to submitting the docu-
ments to the competent national authority via electronic transmission upon request.
Authorised person for documentation: Dieter Richter
The thrust actuators further meet the requirements of the following european directives and the
respective approximation of national laws:
1.
EC-directive about electromagnetic compatibility 2004/108/EC
(valid until 19. April 2016)
EU-directive about electromagnetic compatibility 2014/30/EU
(valid from 20. April 2016)
The following harmonised standards have been applied:
EN 61000-6-3: 2007 + A1: 2011; EN 61000-6-2: 2005
2.
EU-Low voltage directive 2006/95/EC
(valid until 19. April 2016)
EU-Low voltage directive 2014/35/EU
(valid from 20. April 2016)
The following harmonised standards have been applied:
EN 60204-1, EN 60335-1, EN 60730-1, EN 60730-2-14
3.
EU-directive on the restriction of the use of certain hazardous substances in
electrical and electronic equipment 2011/65/EU (RoHS II)
Schloß Holte-Stukenbrock, 15.07.2016
The declaration certifies the conformity with the mentioned directives, it does not contain any warranty of properties in the sense of the product liability lay,
however. The safety hints of the product information supplied with the product must be observed. In case of a modification of the applieance not agreed with
the manufacturer and of non-observance of the safety hints this declaration loses its validity.
(Brechmann, Managing director)
..............................................
