Page 2-10
0040506004 0919
Operating and installation instructions
Thrust actuator ARI-PACO
®
2G 1,6D/Y
4.7 Accessories ARI-PACO
®
2G 1,6D
4.8 Accessories ARI-PACO
®
2G 1,6Y
Type
ARI-PACO
®
2G 1,6D
Trip slide
Required for acutating ...
• the travel switch S3 / retracting spindle
(the travel switch S3 exists already in the standard version of the actuator)
• the potentiometer
• the additional travel switches S4 / S5
Options
trip slide necessary
!
Additional
intermediate
position switches
S4, S5
(for low switching
capacities and at
aggressive
atmosphere gold
contacts should be
used)
Type Standard
• 2 pcs., zero potential, switching capacity 10 A, 250 V~
Type
low voltage
• 2 pcs., zero potential, with gold contacts,
switching capacity
max. 0,1 A, 4-30 V
Potentiometer
Conductive
(max. 2 pcs.)
• 1000, 2000, 5000 Ohm; 1 Watt (at +70°C)
• Wiper current max. 0,01mA / recommended 0,002mA
Draht
(max. 2 pcs.)
• 100, 200 Ohm; 0,5 Watt (bei +70°C)
• Wiper current max. 35mA / recommended 0,02mA
Type
ARI-PACO
®
2G 1,6Y
Binary Feedback
Type Relay card
• 2 intermediate positions,
- to set by switch,
- changeover contacts 250V AC 3A ohm resistive load,
6A inductive load
• 1 failure signal and 1 warning signal,
- changeover contacts 30V AC/DC / 2A
Potentiometer
Conductive
(max. 2 pcs.)
• 1000, 2000, 5000 Ohm; 1 Watt (at +70°C)
• Wiper current max. 0,01mA / recommended 0,002mA
Wire
(max. 2 pcs.)
• 100, 200 Ohm; 0,5 Watt (bei +70°C)
• Wiper current max. 35mA / recommended 0,02mA
