Page 2-20
0040506004 0919
Operating and installation instructions
Thrust actuator ARI-PACO
®
2G 1,6D/Y
5.4.2.2 Additional travel switches and setting
Fig. 6: Switchgear and indicating feature ARI-PACO
®
2G 1,6D
5.4.2.2.1 Setting
- Run valve to desired position due to be indicated by the corresponding switch.
- Proceed to turn the setting spindle belonging to the appurtenant switch until the switch is tripped
(audible click).
- Run thrust actuator briefly in both directions, checking and, if need be, correcting the setting.
The actuating feature on the travel switches is designed in such a way that both travel switches can
be overrun in both directions.
Pos.
Designation
Pos.
Designation
50.38
Guide spindle
50.52
Setting spindle for switch S4
50.42
Board support
50.53
Setting spindle for switch S5
50.43.3
Jack strip for mains connection
50.54
Trip cam
50.43.4
Jack strip for motor connection
50.56
Spring
50.44
Self-tapping screw
50.57
Head cap screws
DIN EN ISO 4762 - M4x10
50.50
Trip slide (option)
50.61
Travel switch board
50.51
Setting spindle for switch S3
50.62
Connector, 6-pole (option: travel switch)
