Argox Xellent X-1000VL User Manual Download Page 105

Page: 105 / 124

105

Stand-alone with Barcode Reader

This section covers stand-alone operation with barcode readers. It
is applicable with printer models:

Barcode Reader

Interface

PS/2

RS-232

Printer
Language

PPLB

Model

X-2000V
X-3200
X-2300E
X-3200E

X-1000VL

To use the printer in stand-alone operation with a barcode reader
(scanner), follow the procedure described below

1. Make a form for barcode reader. (Note that the form name

must be “READER” The form should include “ZS” command
to store to flash memory.)

2. Turn on the printer; download the form from PC to printer.
3.

Set the parameter of “READER INSTALLED” on the LCD to
ON position.

4.  Turn off the printer.
5.  Connect the barcode reader to the keyboard interface.
6.  Turn on the printer.
7.  Check LCD for instructions of each data string and scan

barcodes to input data accordingly.

Summary of Contents for Xellent X-1000VL





























































































































Search results

Summary of Contents for Xellent X-1000VL

Reviews:

Related manuals for Xellent X-1000VL

Brands by name

Popular brands

Argox Xellent X-1000VL, User Manual

Search results

Summary of Contents for Xellent X-1000VL

Reviews:

Related manuals for Xellent X-1000VL

Brands by name

Popular brands