48
V 02/21
10. MODE button
Press this button, you can select the running mode as follows:
Note: HEAT mode is not available for cool only units.
11. SLEEP button
By pressing the SLEEP button, the indoor unit light flashes.
After setting the Sleep mode, in the cooling function, the temperature will increase by 1 ° C in one hour, then it will
automatically increase by 1 ° C again after another hour.
After setting the Sleep mode, in the heating function, the temperature will decrease by 2 ° C after one hour, then it will
automatically decrease by 2 ° C again after another hour.
After 10 hours of operation in SLEEP mode, the air conditioner returns to the previous functions and switches off
automatically.
Note: press the MODE button or the ON / OFF button to cancel the setting of the SLEEP function. The SLEEP function
cannot be activated in FAN mode.
12. SWING button (vertical oscillation)
Press this button to set the automatic vertical swing mode, which allows the outer flaps to swing from top to bottom and
vice versa. Press this button again to deactivate the SWING function.
13. SWING button (horizontal oscillation)
This function is not available. However, it is possible to direct the air flow manually, by moving the flaps of the indoor unit
horizontally.
14. Anti-F button
This air conditioner has a special drying and anti-mold function. This function is controlled by the remote control in the
COOLING, DRY and AUTO modes.
When the air conditioner is operating in the heating mode, the indoor fan runs for three minutes on weak ventilation
before stopping. The purpose of this function is to dry the water inside the evaporator and prevent the formation of mold
which can cause the dispersion of a strange odor.
This function is not set by default, it can be freely set and deactivated. The setting method is as follows: when the air
conditioner and remote control are off, point the remote control at the unit and press the "Anti-F" button, the unit will beep
five times and then indicate that this function is set. Once set, this function remains valid unless the air conditioning is
completely switched off or the function is manually deactivated.
To deactivate the function:
1. Turn off the unit.
2. When the air conditioner and the remote control are off, point the remote control at the unit and press this button, the
device emits a sound three times and this indicates that the function is disabled.
NOTE. When this function is active, it is advisable not to restart the air conditioner before it is completely
stopped;
This function will not be active if the unit is switched off or stopped by the “SLEEP” function.
