47
V 02/21
4. DISPLAY button
It is possible to turn the remote control display on or off, while the unit is running, to extend the life of the batteries.
5. iFEEL button
Pressing this button activates the IFeel function. The LCD screen shows the room temperature and when the function is
canceled it shows the set temperature. This function is not active in AUTO and FAN mode.
6. TIMER button
When the air conditioner is on, press this button to deactivate the TIMER function, or when it is off to activate it. When
the button is pressed, the display will show "ON (OFF)" flashing. It is possible to press the " " and " " buttons to set
the timer, each press will increase or decrease the timer by 0.5h up to 10h, then the time interval will be 1h. The settable
range is 0.5-24h. Press the "TIMER" button again to activate the function, the "ON (OFF)" symbol will stop flashing. If the
"TIMER" button is not pressed for 10 seconds while the "ON (OFF)" symbol flashes on the display, the TIMER function
will be canceled. If the TIMER function is active, pressing this button will deactivate it.
NOTE: When the TIMER function is active, all function buttons (except SLEEP, DISPLAY and iFEEL) are usable.
7. HEALTH/iCLEAN button
This button has two functions.
a. HEALTH (FUNCTION NOT AVAILABLE)
b. iCLEAN
When the remote control is off, press the “iClean” button to activate the “iClean” function with a maximum duration of 30
minutes. The purpose of this function is to clean the evaporator from dust, dry the water inside the evaporator and
prevent the formation of mold which can cause the spread of bad odors.
After setting the "iClean" function, press the "iClean" button again to cancel the function or press the ON / OFF button to
cancel the "iClean" function and turn on the appliance.
The “iClean” function is deactivated after 30 minutes of operation if no operation takes place.
Note: the iClean function can be set in parallel with the “Timer on” function; in this case, the “Timer on” function will be
executed after the “iClean” function.
8. or buttons
Press the / button to adjust the temperature from 16 ° C to 32 ° C; the screen will change each time the button is
pressed. Each time you press " " the temperature will increase by 1 ° C and each time you press " " the temperature
will decrease by 1 ° C.
NOTE: The temperature cannot be set in AUTO and FAN mode, so these two buttons will have no effect.
9. TURBO button
Press this button only in COOL or HEAT mode to select the TURBO function and set the maximum fan speed. When
TURBO mode is active, the fan is at maximum speed; When TURBO mode is off, the dispensing speed is restored to the
previous state.
