Subject to change · Filter Unit FAPC 016 · 1020 · EN
Page 7
www.argo-hytos.com
›
If unsuitable products are used or installed in safety-relevant applications, unintended operating states may occur in the application,
which can cause personal injury and / or material damage. Therefore only use the product in safety-relevant applications if this use
is explicitly specified and permitted in the product documentation.
›
You may only put the product into operation, when it has been established that the final product (e.g. a machine or system), into
which the ARGO-HYTOS products have been installed, complies with the country-specific regulations, safety regulations and
standards of the application.
2.7
Product and technology related safety instructions
CAUTION
Leaked hydraulic oil
Environmental hazard / risk of slipping
›
In case of spills, cover the oil-covered surface immediately with an oil-binding medium.
›
Then immediately dispose of the oil-binding medium according to the national environmental regulations.
Ignition hazard
Risk of electrostatic charge by poorly conducting hydraulic fluid
›
I f the electrical conductivity of the hydraulic fluid is not known, please contact the manufacturer of the
hydraulic fluid.
Risk of burns
Contact temperatures according to DIN EN563 (3) and DIN EN13202 (4) may be exceeded during
operation
›
Allow the filter unit to cool down before touching it.
