Subject to change · Filter Unit FAPC 016 · 1020 · EN
Page 13
www.argo-hytos.com
7. Assembly
Let - prior to commissioning - an electrician check whether:
›
the mains voltage matches with the voltage specified on the nameplate of the motor,
›
the power source has appropriately been secured,
›
the cross-section is of sufficient size,
›
cable and connection to the power source are in perfect condition.
With 3-phase AC motors check after connecting that:
›
when switching on, the direction of rotation matches with the direction arrow on the motor, if not, have it changed by
an electrician.
The following steps are to be followed in detail:
›
connect the 230V voltage plug to the local power supply.
WARNING
Faulty power supply
Risk of death! Risk of injury!
›
Always consider the country-specific regulations.
