Areva MiCom P120, Technical Manual

Page: 93 / 668

User Guide P12x/EN FT/A96
MiCOM P121/P122/P123
Page 57/72
Input 2 Trip Circuit
No
Assign logic input 2 to the Trip Circuit Supervision input
function.
Setting choice: Yes, No
Input 2 Start tBF
No
Assign logic input 2 to initiate the Circuit Breaker Fail
function.
Setting choice: Yes, No
Input 2 Reset Leds
No
Assign logic input 2 to the Led Reset input function.
Setting choice: Yes, No
Input 2 Maint. Mode
No
Assign logic input 2 to the Maintenance Mode input
function.
Setting choice: Yes, No
Input 2 Aux3
No
Assign logic input 2 to the Auxiliary Timer 3 input
function.
Setting choice: Yes, No
Input 2 Synchro
No
Assign logic input 2 to the Time Synchronisation input
function.
Setting choice: Yes, No
5.9.9.3 P123 additional Logic Input 2 settings
Input 2 Block 79
No
Assign logic input 2 to the Autoreclose Blocking input
function.
Setting choice: Yes, No
Input 2 Aux4
No
Assign logic input 2 to the Auxiliary Timer 4 input
function.
Setting choice: Yes, No
Input 2 Manual Close
No
Assign logic input 2 to the Manual control close signal
input
Setting choice: Yes, No.
Input 2 Local Mode
No
Assign logic input 2 to the Local Mode input function
Setting choice: Yes, No
5.9.9.4 P121, P122 & P123 additional Inputs sub-menu settings
Aux Times
Heading of the Auxiliary timers sub-menu.
To navigate within submenu points, press
. To
modify setting, press . Use to scroll and set
available selections. Press to confirm choice.
Aux1 Time
t Aux1
10s
Displays setting value of timer assigned to logic input
Aux3.
The setting range for tAux1 is from 0 ms to 200 s, in
steps of 10 ms.
Aux2 Time
t Aux2
10s
Displays setting value of timer assigned to logic input
Aux3.
The setting range for tAux2 is from 0 ms to 200 s, in
steps of 10 ms.
5.9.9.5 P122 & P123 additional Inputs sub-menu settings
Aux3 Time
t Aux3
10s
Displays setting value of timer assigned to logic input
Aux3.
The setting range for tAux3 is from 0 ms to 200 s, in
steps of 10 ms.
5.9.9.6 P123 additional Inputs sub-menu settings
Aux4 Time
t Aux4
10s
Displays setting value of timer assigned to logic input
Aux4.
The setting range for tAux4 is from 0 ms to 200 s, in
steps of 10 ms.