Areva MiCom P120, Technical Manual

Page: 62 / 668

P12x/EN FT/A96 User Guide
Page 26/72
MiCOM P120/P121/P122/P123
Reset led on
fault ?
No
Setting choice Yes: the LED associated with an old
alarm will be automatically reset when a new fault
occurs. This is done to avoid a display of numerous
alarms that are not active any more. (
P122 & P123 only)
Setting choice No: the appearance of a new fault will not
automatically reset LEDs associated with an old fault.
To reset or not the LED when a new fault occurs. Press
to modify the value and use keys to select
your choice. Press to validate the setting.
INH Alarm Taux1
No
Setting choice Yes: activation of auxiliary timer 1 output
will not raise an alarm provided it does not lead to a trip
order
Setting choice No: activation of auxiliary timer 1 output
will raise an alarm.
Press
to modify and use to select your choice.
Press to validate the setting.
INH Alarm Taux2
No
Setting choice Yes: activation of auxiliary timer 2 output
will not raise an alarm provided it does not lead to a trip
order
Setting choice No: activation of auxiliary timer 2 output
will raise an alarm.
Press
to modify and use to select your choice.
Press to validate the setting.
INH Alarm Taux3
No
Setting choice Yes: activation of auxiliary timer 3 output
will not raise an alarm provided it does not lead to a trip
order
Setting choice No: activation of auxiliary timer 3 output
will raise an alarm.
Press
to modify and use to select your choice.
Press to validate the setting.
INH Alarm Taux4
No
Setting choice Yes: activation of auxiliary timer 4 output
will not raise an alarm provided it does not lead to a trip
order
Setting choice No: activation of auxiliary timer 4 output
will raise an alarm.
Press
to modify and use to select your choice.
Press to validate the setting.