Application Guide
P12x/EN AP/A96
MiCOM P120/P121/P122/P123
Page 39/80
16.
SETTING GROUP SELECTION (P122 & P123 ONLY)
MiCOM P122 and P123 relays have two setting groups associated to the protection
functions named PROTECTION G1 and PROTECTION G2. Only one group is active.
Switching between the groups can be done via:
−
the relay front panel interface (CONFIGURATION/GROUP SELECT/ SETTING
GROUP 1 or 2),
−
a dedicated logic input (AUTOMAT. CTRL/INPUT X/CHANGE SET) where X is
the chosen logic input,
−
through the communications port (refer to Mapping Database for detailed
information).
To avoid any false trip, the change of setting group is only carried out when no protection
function is running (except the thermal overload function).
If a setting group change is received during any protection or automation function, it is stored
and executed after the last timer has elapsed.
The user can check which one of the active group is active looking under the OP
PARAMETERS menu.
The user can also assign the active group to an output relay. Using a normally open contact,
this means that:
−
an open contact will indicate that the active group is Group 1
−
a close contact will indicate that the active group is Group 2
Change of setting group done by a digital input
It is possible to change the setting group via the activation of a digital input (on level).
Warning: if the digital input that has been assigned to the change of setting group operates
on level (low or high), it is not possible to change the setting group via remote
communication or front panel.
SWITCH BETWEEN ACTIVE GROUPS:
When powering on the relay, the group selected (Group 1 or Group 2) corresponds to the
state of the logic input. This means:
A - With a Logic input configuration = 0
Group 1 = logic Input is not active
Group 2 = logic Input is active
If the programmed logic input is supplied with +V, then the active group will be G1.
If the programmed logic input is not supplied with +V , then the active group will be G2.
B - With a Logic input configuration = 1
Group 1 = logic Input is not active
Group 2 = logic Input is active
If the set logic input is energized with +V, then the active group will be G2.
If the set logic input is not energized with +V, then the active group will be G1.
Summary of Contents for MiCom P120
