background image

DPR-145 User Manual                                                                           V-3.0 

(14.09.2016) 

 

-1- 

 

  

 

  

DPR-145  

TEMPERATURE 
PROTECTION RELAY 

 

PT100 INPUTS: 4 

 

RELAY OUTPUTS: 4 

 

RS-485 MODBUS PORT 

 

UNIVERSAL SUPPLY 

 

 

DPR-145 is a precision unit designed for the 
temperature protection of dry type or resin filled 
MV transformers. The unit offers a high degree of 
protection against electromagnetic disturbances. 

The unit has 4 temperature inputs of PT100 type. 
Three of them are used for the transformer 
protection. The fourth input may be used as core 
temperature protection or ambient temperature 
monitoring. 

Alarm and trip levels of the unit are independently 
adjustable for first 3 sensors and the fourth 
sensor input. 

Alarm levels are adjusted using the program 
mode. If no operation is performed, then the unit 
will exit program mode in 3 minutes. 

The unit offers a cable compensation function in 
order to prevent long cables from impairing the  
measurement precision. 

The unit has 4 dry contact relay outputs rated 6A. 

FAN

: provides cooler fan control 

TRIP

: high temperature failure relay 

ALARM

: pre-alarm relay 

FAULT

: sensor or internal failure indicator 

The unit offers an automatic self test feature. The 
self test consists on the verification of sensor 
inputs and internal memory integrity. 

The standard isolated RS-485 MODBUS RTU 
communication port is not affected by ground 
potential differences and allows safe transfer of 
information to remote management and 
automation systems. 

The supply input is isolated from sensor 
connections.   

 

1 degrees C measurement precision 

4 x PT100 analog inputs 

Allows cable length compensation 

Automatic detection of sensor failures 

Automatic and manual self test 

4 x relay outputs, 5A/250Vac 

Fully isolated RS-485 serial port 

MODBUS-RTU communication 

Recording of maximum temperatures 

Front panel programmable  

2 alarm thresholds for channels 1-2-3 

2 alarm thresholds for channel 4 

Easy to read, 3 digit 14mm led display 

Supply voltage range: 19-400VDC (85-305VAC) 

Reduced panel depth, easy to install 

Wide operating temperature range, -

20 to +70°C 

Sealed front panel (IP65 with gasket) 

2 part connection system

 

 

  

 

   

 

 

DESCRIPTION

 

FEATURES

 

Summary of Contents for DPR-145




















Reviews: