INSTALLATION & ASSEMBLY INSTRUCTIONS
7
CONTINUED
WINDOW MOUNTING
Remove Front Panel and Chassis
1. Pull down the front panel and remove the filter.
2 . Lift the front panel upwards to remove and place
it to the side .
3 . Locate the two faceplate screws and remove
them . These screws will need to be re-installed
before mounting the air conditioner .
4 . After removing the screws, gently pull the
faceplate away from the air conditioner cabinet .
5 . Remove the control panel screw and
WI-FI module screw (if available) from
the front panel .
6 . Remove the screws from the cabinet .
Do not pull or lift
this area. It may
cause damage.
Pull the base handle.
7 . Hold the cabinet while pulling on the base
handle to carefully remove the unit . Do not
pull or lift near the top of the unit .