USING YOUR AIR CONDITIONER
14
CONTINUED
Electronic Control Panel & Remote Control
5 .
Timer Button:
Use these buttons on the control
panel and remote to set the Timer .
Timer Off:
The timed stop is programmed by pressing
TIMER button . Set the rest time by pressing the
button
+
or
-
until the rest time displayed is to your
liking then press the TIMER button again .
Timer On:
When the unit is off, press TIMER button
at the first time, set the temperature with pressing
the button
+
or
-
. Press TIMER button at the
second time, set the rest time with pressing the
button
+
or
-
. Press TIMER button at the third
time, confirm the setting, then the rest time to next
automatical switching-on could be read on the
display of the machine .
Note: It can be set to automatically turn off or on in 0.5-
24 hours. Each press of the “+” “-” buttons will increase
or decrease the timer. The Timer can be set in 0.5 hours
increment below 10 hours and 1 hour increment for 10
hours or above. The SET light will turn on while setting.
To cancel the set function, press the TIMER button again.
6 .
Eco Mode Button:
When the unit is in Eco
mode,
the light will turn on . In Eco mode, the unit
will turn off once the room is cooled to the
temperature set by the user . The unit will turn
back on when the room temperature rises above
the set temperature . Before the compressor
starts, the fan motor will run for a while, then it
will stop for a while . It will repeat to provide a
more comfortable environment and save energy .
7 .
Sleep Button:
Press the SLEEP button, all the
display lights will turn off after a while, but the
SLEEP light is always on . In SLEEP mode, the
air conditioner will automatically adjust the
temperature and fan speed to make the room
more comfortable during the night . The set
temperature will automatically change every
30-60 minutes and at most change six times
until the setting temperature is 81ºF or 82ºF
for cooling mode and 75ºF or 76ºF for heating
mode .
8 .
Fan Speed Button:
Press the FAN SPEED button
to choose the fan speed options . You can choose
Hi, Med, Lo or auto speed in COOL or HEAT
mode and choose Hi, Med, Lo in FAN mode .
9 .
Filter Button:
The Filter Check light will turn on
to remind the user to clean the filter after the fan
motor runs for 500 total hours. Turn off the light
by pressing the Filter Check button .
10 .
Directional Louvers:
The horizontal wheels control
the horizontal airflow, the air deflectors control
the vertical airflow.