INSTALLATION & ASSEMBLY INSTRUCTIONS
11
CONTINUED
WINDOW MOUNTING
Installing the Chassis into the Cabinet
6 . Extend the side accordion panels out against
the window frame as shown .
Storm Window Requirements
A storm window frame will not allow the air conditioner to tilt properly which in turn will keep it from draining
properly . To adjust for this, attach a board or piece of wood to the sill . The board or wood piece should have
a depth of at least 1/2″. Make sure the board or piece of wood is approximately 1/2″ higher than the storm
window frame . This will allow the air conditioner to tilt enough for proper drainage .
7. Drive 1/2″ locking screws through frame holes,
and drive one 3/4″ screw through the top rail
into window sash as shown .
8 . To secure lower sash in place, attach right angle
sash lock with 3/4″ screws as shown.
9 . Cut foam seal and insert in the space between
the upper and lower sashes as shown .