OPERATING YOUR AIR CONDITIONER
15
REMOTE CONTROL
1 .
POWER:
Turn the air conditioner on and off.
2 .
MODE:
Press the button to select the mode of
operation, AUTO, COOL, DRY, FAN, HEAT .
Note: The HEAT mode is only for some heating models. If
you do not need it, press the MODE button for more than
5 seconds to delete the HEAT function, and the COOL mode
will be selected automatically. Press the MODE again for
more than 5 seconds to add the HEAT function, and the
HEAT mode will be selected automatically.
3 .
+
and
-
:
Use these buttons to increase or
decrease the Set Temperature or Timer .
Temperature range: 61ºF~88ºF or 16ºC ~31ºC .
4 .
TURBO:
When the remote is ON, press the button
to activate the TURBO function, under AUTO/
COOL/FAN/HEAT mode .
Note: ºF and ºC change: Press TURBO button for more than
5 seconds to switch the ºF and ºC degree display. This
should be done within 3 minutes of inserting the batteries.
5 .
DISPLAY:
To press the DISPLAY button, it can
switch off/on all lights or LED display.
6 .
TIMER:
Use these buttons on the control panel
and remote to set the Timer .
Timer Off:
The timed stop is programmed by
pressing TIMER button . Set the rest time by
pressing the button “ ” or “ ” until the rest
time you want is displayed, then press TIMER
button again .
Timer On:
When the unit is off, press TIMER
button one time and set the temperature by
pressing the button “ ” or “ ” . Press TIMER
button a second time to set the rest time by
pressing the button “ ” or “ ” . Press TIMER
button a third time to confirm the setting, then
the countdown to the next automatic “on” cycle
will be displayed .
Note: The timer can be set to automatically turn off or on
in 0.5-24 hours. Each press of the “ ” or “ ” buttons will
increase or decrease the timer. The Timer can be set in 0.5
hours increment below 10 hours and 1 hour increment for
10 hours or above. The SET light will turn on while setting.
To cancel the set function, press the TIMER button again.
7 .
I FEEL:
Press the button to activate the remote
thermostat function . The function enables the
remote to measure the temperature at its current
location and send a signal to the air conditioner
to optimize the temperature around you .
8 .
FAN:
Press the FAN SPEED button to choose
the fan speed options . You can choose Hi, Med,
Low, or auto speed in COOL mode and choose
Hi, Med, Lo in FAN mode .
9 .
ECO:
When the unit is in ECO mode, the light
will turn on . In ECO mode, the unit will turn
off once the room is cooled to the user set
temperature . The unit will turn back on when
the room temperature rises above the user
set temperature . Before the compressor starts
the fan motor will keep running for a while and
stop for a while and again to provide a more
comfortable feeling and save energy .
Battery Size:
AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries