INSTALLATION & ASSEMBLY INSTRUCTIONS
10
CONTINUED
WINDOW MOUNTING
4 . Tighten all the bolts with locknuts securely
Installing the Chassis into the Cabinet
1 . Team lift (two people or more) the air conditioner
chassis and carefully slide it into the cabinet .
Let the front of the air conditioner hang out
approximately 6″.
2 .
CAUTION:
DO NOT PUSH ON THE CONTROLS OR
FINNED COILS .
3. Be sure the chassis is firmly seated in the back
of the cabinet .
4 . Insert all screws removed during window
installation and fasten, then reattach the front
faceplate, front panel, and the air filter.
5. If the wall is too near to effect driving the cabinet
screw back, you can assemble the chassis lock
at the right bottom corner of the chassis with a
3/8″ screw as shown, before assembling the
front panel .
Install Support Brackets
1. Hold each support bracket flush against the
outside of the window sill . Tighten each bracket
to the bottom of the cabinet as shown . Mark the
brackets at the top level of the window sill and
then remove .
2 . Assemble the sill angle brackets to the support
brackets at the marked position with long bolt
and locknut as shown . Hand tighten, but not for
any changes that may need to be made later
during installation .
3 . Install the support brackets (with sill angle
brackets) to the bottom of the cabinet as shown .