95
15. Slide the air sleeve down far enough to liberally lubricate
the bearing head assembly.
GGGG
16. To set the IFP depth, remove the bleed screw; then using
Floating Piston Location Gauge (p/n 0644-350), adjust the
depth to 2.5 in. Install the bleed screw.
HHHH
17. Pour the excess oil from the IFP reservoir, install
the reservoir end cap pressing it down firmly, and
install the snap ring.
IIII
JJJJ
KKKK
18. Using an appropriate inflation needle, charge the
reservoir to 350 psi (p/n 3703-062/063).
19. Using an appropriate strap wrench, tighten the air
sleeve into the rebound eyelet assembly.
LLLL
20. Using a high-pressure hand air pump, pressurize
the shocks to 275 psi EVOL/125 psi Main.
