63
RS002A
3. Using a pair of needle-nose pliers, remove the jet
needle assembly. Account for the E-clip and
washer.
AH617D
4. Remove the Phillips-head screw and the drain plug
(with O-ring) securing the float chamber to the
mixing body. Remove the chamber and account
for the O-ring.
RS003A
5. Remove the main jet, pilot jet, and starter jet.
RS005A
6. Remove the screws securing the float assembly.
RS007A
7. Remove the float assembly by lifting it up and out
of the mixing body. Account for the O-ring and the
needle valve.
RS004
NOTE: It may be necessary to use a spray lubri-
cant such as WD-40 to aid in removing the float
assembly.
8. Remove the Phillips-head screws securing the fun-
nel assembly to the mixing body.
CAUTION
To remove the throttle valve, the jet needle must be
removed or damage to the jet needle will result.
