2-14
FS194A
6. Insert the flex-drive shaft into the pinion drive and
secure with the two set screws.
FS177A
7. Position the engine to the chassis mounts. In order,
install cap screws (D) securing the engine plate to the
front chassis mounts; then install cap screw (E)
securing the MAG-side mounting bracket to the
chassis and cap screw (D) to the PTO-side mount.
Tighten the cap screws to 50 ft-lb.
8. Position the torque bumper against the gear case;
then install the PTO-side engine mounting bracket.
NOTE: Prior to installing the bracket, assure the U-
nut clip is centered in position.
FS195A
9. Using the illustration following step 3, install the cap
screw and lock nut (A) and the lower cap screw (B)
securing the PTO-side bracket to the chassis; then
install the four cap screws (C) (coated with blue Loc-
tite #243) securing the bracket to the engine. Tighten
all mounting hardware to 23 ft-lb.
10. Connect the coolant hose to the outlet of the front
heat exchanger and secure with the hose clamp.
FS196A
11. Route the ignition harness and the coolant tempera-
ture sensor two-wire connector between the coolant
tank and the chassis; then connect all ignition/main
harness plug-ins and the two-wire connector.
FS197
NOTE: Prior to connecting the harness, clean all
plug-ins with contact cleaner and compressed air.
12. Secure the ignition harness to the coolant hose with a
cable tie in the position as noted in removing; then
install the harness wrap.
FS181
13. Place the recoil starter into position and secure the
starter with the cap screws. In a crisscross pattern,
tighten to 96 in.-lb.
! WARNING
Always wear safety glasses when drying components
with compressed air.
Summary of Contents for Sno Pro 120
