6-16
ZJ214A
NOTE: Prior to installing the driveshaft, ensure the
driveshaft sleeves are centered to the inner bore of
the brake caliper housing.
ZJ307A
2. With the brake lever lock engaged and the brake disc
correctly positioned in the brake housing assembly,
properly align the splines of the driveshaft with the
brake disc; then push the driveshaft the rest of the
way into the brake housing until properly seated.
ZJ215A
3. Apply Anti-Seize Thread Compound to the threads
of the brake disc retaining nut; then install the nut.
4. With the brake lever in the locked position, use
Brake Disc Socket Wrench to tighten the brake disc
retaining nut to 120 ft-lb.
ZJ237
NOTE: After the retaining nut is tightened to specifi-
cations, peen the nut at the flat spot of the driveshaft.
5. Install the speedometer sensor mounting bracket
(with two spacers); then secure with the two cap
screws. Tighten to 17 ft-lb.
NOTE: At this point, install and secure the battery;
then connect the battery cables (positive cable first).
6. If the gear case is installed, secure the driveshaft to
the output shaft with the cap screw (coated with blue
Loctite #243) and washer. Tighten to 70 ft-lb.
742-020A
NOTE: If the gear case is not installed, do not
secure the driveshaft to the output shaft at this time.
Proceed to step 7.
7. Place the resonator into position and secure with the
springs and hairpin clip.
8. Install the skid frame (see Section 7).
NOTE: At this point if the gear case is installed, pro-
ceed to step 22 to finish installing the track drive-
shaft.
9. Place the gear case onto the driveshaft; then press the
gear case toward the sprocket until it properly seats
into place on the chassis. It may be necessary to
rotate the driveshaft slightly for proper seating.
NOTE: Prior to placing the gear case onto the drive-
shaft, apply a light coat of Anti-Seize Thread Com-
pound to the splines of the driveshaft.
Summary of Contents for Sno Pro 120
