4-30
ZJ010A
4. Disconnect the fuel pump four-wire connector; then
slide the gas tank rearward enough to gain access to
the gasline hose connector.
FS261A
5. Compress the clip on the gasline hose connector and
remove the hose from the gas tank; then disconnect
the gas tank vent hose and close off the vent hose
outlet of the gas tank and remove the gas tank.
IO053
INSTALLING (Bearcat/F-Series/T-
Series)
1. Install the gasline hose onto the tank and press down
on the connector until it snaps into place; then install
the vent hose to the outlet and secure with the hose
clamp.
IO054
2. Install the gas tank to its proper position; then secure
the tank with the seat support assembly and install
the four cap screws securing the seat support tubes to
the support plate. Tighten securely.
NOTE: It may be necessary to align the U-nut clips
with a punch.
3. Install the six torx-head screws securing the seat sup-
port assembly to the tunnel.
4. Connect the fuel pump four-wire connector.
FS261A
5. Install the seat (see Section 8).
WARNING
Since the fuel supply hose may be under pressure,
remove it slowly to release the pressure. Place an
absorbent towel around the connection to absorb gas-
oline; then remove the hose slowly to release the pres-
sure. Always wear safety glasses when removing the
fuel hoses.
CAUTION
Make sure the gasline hose is properly and securely
“snapped” onto the gas tank.
Summary of Contents for Sno Pro 120
