16
GENERAL INFORMATION
Low Oil Warning Icon
The Low Oil Warning Icon is designed
to alert the snowmobile operator when
the oil in the oil injection reservoir
gets below a prescribed level; how-
ever, it is highly recommended that a
visual verification of the oil level in
the reservoir be done prior to operat-
ing the snowmobile. Once the Low Oil
Warning Icon illuminates during oper-
ation of the snowmobile, the operator
must periodically monitor the level of
oil in the reservoir and must fill the
reservoir the next time gasoline is
added to the gas tank. The “alert level”
of the Low Oil Warning Icon is
approximately equal to 1 tankful of
gasoline under normal operating con-
ditions.
SPEEDOMETER/
TACHOMETER
INDICATOR ICONS
(Premium Gauge)
This snowmobile is equipped with a
combination speedometer/tachometer.
Indicator icons are incorporated within
the speedometer/tachometer. Also
incorporated into the speedometer/
tachometer is a digital readout screen.
FZ001A
A. High Beam
B. Oil Pressure/Low Oil
C. Coolant Temperature
D. Increment Button
E. Select Button
F. Decrement Button
G. Service
H. Charging System (1100 cc)
RPM/MPH (kph)
By pushing the increment button once,
the RPM and MPH will be displayed
(one on the readout screen and one
with the needle). By pushing the but-
ton once again, the functions will be
reversed.
By pushing the increment button (with
speed being displayed) for more than
two seconds, the display will change
between standard mph or metric kph.
With RPM displayed on the readout
screen by pushing and holding the
increment button, maximum RPM will
be displayed on the readout screen.
The maximum RPM readout will reset
when the decrement button is pushed
(while maximum RPM is displayed).
Odometer/Trip-Meter
(1)/Trip-Meter (2)/
Hour-Meter
By pushing the decrement button, the
readout screen will display odometer,
trip-meter (1), trip-meter (2), and
hour-meter. To reset the trip meter
with the trip meter displayed, push and
hold the decrement button until the
display is cleared. The hour-meter
readout will not reset.
Clock/Altimeter
NOTE: The altimeter is avail-
able on the 800/1000/1100 cc mod-
els only.
By pushing the select button, the read-
out screen will display clock, altime-
ter, and maximum altimeter.
