Controls and Indicators
Front Panel 8100-8200
The front panel of the Arcserve Appliance 8100-8200 contains control panel but-
tons, control panel LEDs, and drive carrier LEDs. The following table describes
these items:
Control/Indicator Description
I/O Power button
Used to turn on and off power from the power supply to the appli-
ance components. When turning off the power, the main power is
turned off but standby power is still supplied. Therefore, to ensure
that power is completely removed from the appliance, unplug the
power supply cable before performing maintenance.
Reset button
Used to reboot the appliance.
Power LED
Solid Green:
Indicates that the power is being supplied to the power
supply of the appliance.
This LED should normally be on when the appliance is operating.
HDD LED
Blinking Amber
: Indicates activity on at least one of the hard drives.
Network Interface
Card (NIC1) LED
Blinking Amber
: Indicates network activity on Network 1 (ETH0 Port).
Network Interface
Card (NIC2) LED
Blinking Amber:
Indicates network activity on Network 2 (ETH1 Port).
Information LED
Continuously on and Red:
An overheat condition has occurred.
30 Arcserve Appliance User Guide
