Controls and Indicators
7
Information LED
Continuously on and Red:
An overheat condition has
occurred. (This can be caused due to cable con-
gestion.)
*Blinking Red - Fast (1 second):
Fan Failure. Check for
an inoperative fan.
*Blinking Red - Slow (4 seconds):
Power Failure.
Check for an inoperative power supply.
Solid Blue:
Local UID has been activated. Use this func-
tion to locate the Server in a rack environment.
Blinking Blue:
Remote UID has been activated. Use
this function to locate the Server from a remote loc-
ation.
8
Unit Identifier (UID)
button
Used to turn on or off the Universal Information LED
(blue) on both the front and rear appliance panels.
When the blue LED is on, the appliance can be easily
located in a rack (from either the front or the back).
9
Hard Drive (HDD) LED
Blinking Green
: Indicates activity on the cor-
responding drive.
10
Hard Drive (HDD) LED
*Solid Red
: Indicates failure of the corresponding hard
drive.
With the Arcserve Appliance, if one hard drive fails, the
rest of the drives will kick in immediately to ensure no
data is lost and the appliance continues to work nor-
mally. Therefore, to guard against any problems asso-
ciated with multiple hard drive failures, it is important
to replace a hard drive as soon as possible to minimize
potential loss of data.
11
Hard Drive (HDD) Latch Used to unlock and remove the hard drive.
12
Solid State Drive (SSD)
LED
*Solid Red
: Indicates drive failure.
13
Solid State Drive (SSD)
LED
Solid Green
: Indicates drive activity.
Blinking Green
: Indicates the drive is being accessed.
14
Solid State Drive (SSD)
Latch
Used to unlock and remove the SSD drive.
*Any Solid or Blinking Red light indicates some kind of failure. To quickly resolve this issue,
contact
.
Chapter 2: Introducing the Arcserve Appliance 27
