Arcserve 7100 User Manual Download Page 187

Page: 187 / 260

Working with Expansion Kit in Arcserve Appliance 9012-9504 DR Models

d. Click one of the following options to complete the pending actions:

Apply Now

Starts the convert to Raid action immediately.

At Next Reboot

Starts the convert to Raid action at the time of next reboot.

At Scheduled Time

Starts the convert to Raid action at the scheduled time.

Discard All Pending

Discards the convert to Raid action for all the disks.

e. Navigate to

Maintenance

Job Queue

The list of jobs running to convert the disks to Raid appears. When con-
vert to RAID job is completed the status changes to

Completed (100%)

3. Perform the following steps to create virtual disk:

a. Navigate to Configuration, Storage Configuration and Virtual Disk

Configuration.

b. Under

Virtual Disk Configuration

section, click

Create Virtual Disk

c. Select

RAID-6

Layout

d. Under

Select Physical Disks

section, select the disks that are con-

verted to RAID.

e. Click

Add to Pending Operations

Chapter 9: Performing Appliance Capacity Expansion 179

Summary of Contents for 7100





































































































































































































































































Search results

Summary of Contents for 7100

Reviews:

Related manuals for 7100

Brands by name

Popular brands

Arcserve 7100, User Manual

Search results

Summary of Contents for 7100

Reviews:

Related manuals for 7100

Brands by name

Popular brands