ARCA AIRPELLET, Technical Manual

Page: 20 / 61

2.2.1 The remote control
Using the remote control you can adjust the heating
power, the temperature
desired and the automatic on / off the appliance.
S = indicator light indicating the pressure of each key.
Correspondence of display keys with remote control
keys
1 = p3+p5
2 = p2
3 = p3
4 = p4
5 = p5
Fig. 18
To turn on the stove, press buttons simultaneously for 1 second 2 and5;
the device automatically enters the start-up phase. This is followed by the start-up phase which
allows the stove to develop and settle the flame.
Once the start-up phase, the stove goes into normal operation buttons 4 and 5 it is possible to
adjust the heating power while using buttons 2 and 3 you can adjust the desired room temperature.
To turn off the stove and hold simultaneously for three seconds the buttons 3 and 5, the display will
show "OFF".
The remote control works with a MN21 12V battery (type gate openers).
To replace the batteries, open the cover on the back as shown in the figures below.
fig 19
Open by pressing the part shown i n fig. 19
20