ARCA AIRPELLET, Technical Manual

Page: 56 / 61

fig. 69 fig. 70 fig. 71
51
Through the vacuum cleaner, clean the inside of the chamber
accumulated ash from the combustion
fig. 72
Surface Cleaning
To clean the surfaces, use a cloth with mild soap and water.The use cleaning agents or aggressive
solvents gave damage the surfaces and the stove. Do not use any detergent. We recommend that
you try it on an area that is not visible or contact the authorized service center for advice about
it.Cleaning of metal partsTo clean the metal parts of the heater with a soft cloth dampened with
water.
Never clean the metal parts with alcohol, thinner, benzene, acetone or other detergents. In case of
use of these substances, our company accepts no liability. Any changes in the tone of the pieces
of metal can having an inappropriate use of the stove.
WARNING!
You must do the daily cleaning of the brazier and periodic ash box. The
little or no cleaning in some cases can cause problems turning on the
stove and consequent damage in this or in the environment, and can
cause emissions of soot and unburned. Do not pour the pellets which may
exist in the grate and has not been completely burned.
Cleaning of the grate and its support
When the flame acquires tones of red color
or is weak, accompanied by black smoke,
means that there are ash deposits or
incrustations which do not allow the correct
operation of the stove and which must be
eliminated, Fig. 73). Simply pull the grate
every day lifting of its head, and later, from
the ashes and clean any deposits that may
form, paying special attention to free orifices
stopped using a pointed tool, not fitted as
standard equipment of the machine. This is
especially necessary in the first few times
with each time, especially if you use pellets