ARCA AIRPELLET, Technical Manual

Page: 26 / 61

2.4.8 Stand-by
If enabled in the menu, standby function allows you to turn off the stove once the conditions
explained below.
It is enabled if the ambient temperature is higher than the set temperature (set temperature). The
display shows "Go-standby" and follow the remaining minutes. (fig. 30)
fig. 30
The display shows the message "Waiting cool". In this state the stove has screw off (LED screw
off), the coil turns off and the LED ON/OFF flashes.
(Fig 31)
fig. 31
When the temperature of the flue gas is reduced enough, the stove goes into stand-by mode and
runs the "Stop eco temp good”. The screw is turned off (auger light off), the exchanger is off
(exchanger light off), as well as the fan of the flue gas. (fig. 32)
fig. 32
If the ambient temperature, decreases below the set temperature (ambient temperature set) the
stove turns on again.
26