05/10/11
Page 18 of 21
378 7983
55. Fit the wing stone guards to the bull bar
/ vehicle using M6 x 20 black bolts, M6
black washers, M6 black spring
washers.
Use the M8 x 25 black bolt, M8 black
flat washer and M8 black spring washer
to secure the stone guard to the
bracket fitted in step 55.
56. Mark lines along the inner guards using
the bottom edge of the stone guards as
a guide.
57. Remove the stone guards and cut
along the lines marked in the previous
step.
58. Tuck the inner guards into the stone
guards.
59. If fitting optional driving lights to vehicle
do so at this stage. Guide ratchet
spanner between the upper and lower
pans, as shown, to tighten the lights to
the bar.
