05/10/11
Page 1 of 21
378 7983
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:
(08) 9244 3553
NSW:
(02) 9821 3633
ACT:
(02) 6280 7475
SA:
(08) 8244 5001
QLD:
(07) 3872 3872
NT:
(08) 8947 2262
TAS:
(03) 6331 4190
HILUX ARB BULL BAR, 2011 ONWARDS
(SRS AIR BAG EQUIPPED MODELS)
PRODUCT NUMBER: -
341 4460 - Winch Bull Bar, to suit flared vehicles only.
341 4450 – Winch Bull Bar to suit non-flared vehicles only.
321 4460 - Bull Bar Non Winch, to suit flared vehicles only.
321 4450 – Bull Bar Non Winch to suit non-flared vehicles only.
FITTING KIT: -
6173152 -To suit winch bull bars. (341 4450/60)
6173155 - To suit non-winch bars. (321 4450/60)
WARNING
NOTE THE FOLLOWING: -
♦
This product must be installed exactly as per these instructions using only the hardware supplied.
♦
In the event of damage to any bull bar component, contact your nearest authorised ARB stockist.
Repairs or modifications to the impact absorption system must not be attempted.
♦
Do not use this product for any vehicle make or model, other than those specified by ARB.
♦
Do not remove labels from this bull bar.
♦
This product or its fixing must not be modified in any way.
♦
The installation of this product may require the use of specialized tools and/or techniques
♦
It is recommended that this product is only installed by trained personnel
♦
These instructions are correct as at the publication date. ARB Corporation Ltd. cannot be held
responsible for the impact of any changes subsequently made by the vehicle manufacturer
♦
During installation, it is the duty of the installer to check correct operation/clearances of all
components
♦
Work safely at all times
♦
Unless otherwise instructed, tighten fasteners to specified torque
