VP5000-DC/DC60, VP5000-DC/DC200-HL
Product description
Last edited 2019-02-08
by Sonja Scheunert
Filename
VP5000_DCDC60_200-HL_installation_manual_v1-4en.docx
49 / 173
Pin no.
Pin type
on the
device
Description
Function
Available for VP5000-DC/
DC60
DC200-HL
17
Female
PT100 2 GND
PT100 2 temperature
measurement ground
pin.
Yes
Yes
Table 25: Pin assignment [ST2]
3.7.3
[ST3] design and pin assignment
Figure 22: Pin assignment [ST3]
The pin assignment on the device connector is
shown.
Design
Manufacturer: Intercontec
Connector type: A ST A 035
Connector design: 17-pin, type "P"
Please note that the VECTOPOWER is delivered
without mating connectors. See chapter 3.13
Product description, Accessories that can be
obtained from ARADEX AG and chapter 3.14 Product
description, Accessories that the customer must
provide.
Function
The connection [ST3] is used to connect to the
VECTOBUS.
Application
The VECTOBUS connects the VECTOPOWER with the
VECTONUM V8 system. With a VECTONUM V8
system, several VECTOPOWERs as well as different
types of VECTOPOWER devices can be programmed
and controlled.
Programming is done individually for each
application. For further information on this, contact
ARADEX AG.
Pin no.
Pin type on
the device
Description
Function
1
-
-
-
2
-
-
-
3
-
-
-
