Aquacal TropiCal T170, Operation Manual

Page: 7 / 73

Page - 3
1 - Operation
IN THIS SECTION:
1.1 Display Door 3
1.2 Wake Up Heat Pump 3
1.3 Using Entry Code to Access Heat Pump 4
1.4 Display Panel 4
1.5 Activate HEAT Mode, COOL Mode, AUTO Mode, or Deactivate
Equipment
7
1.6 Set a desired temperature (setpoint) for the heat pump to activate 7
1.7 Using Shortcuts 8
1.8 Programming 10
1.8.a Setting Date and Time 10
1.8.b Setting Date and Time Format 11
1.8.c Selecting Celsius or Fahrenheit 12
1.8.d Setting Entry Code Option 13
1.8.e Disabling Entry Code Option 14
1.8.f Configuring Groups 15
1.8.g Configuring Schedules 18
1.8.h Schedule and Program Modes 23
1.9 External Equipment 27
1.9.a PoolSync® 28
1.9.b Operating Heat Pump (With an External Controller) 29
1.9.c Operating Heat Pump (With an External Flow Switch) 29
1.9.d Operating Multiple Connected Heat Pumps 29
1.1 Display Door
The display panel is located in a door compartment on the front of the heat pump. This compartment is
designed to protect the display against harsh weather. It can also be padlocked for extra security.
l
Press the bottom of the
panel to open the
display panel door.
l
To close, push the
display panel up. Then
press the
bottom of the
panel in until a clicking
noise is heard.
1.2 Wake Up Heat Pump
The display's backlight will be off when the heat pump is in
sleep mode. To wake up the heat pump, slowly slide a finger
across the buttons.
l
The display will illuminate.
l
The message "KEYPAD UNLOCKED" will briefly appear.
l
Then the water temperature and mode will display.
1
-
O
pe
ra
tion