Page - 13
1.8.d Setting Entry Code Option
The entry code feature can prevent unauthorized access to the heat pump adjustments. This feature initiates
after the heat pump goes into the sleep mode for the first time. This feature is commonly used on commercial
applications.
NOTICE
Failure to heed the following may result in damage to equipment.
l
Before enabling the entry code feature, be sure to record the code.
If lost, the heat pump will require a
program reset to regain access. This reset may require additional configuration by the installer.
PLEASE NOTE -
A heat pump requesting an entry code is different than the control panel's sleep mode. (See
"
" on page 3 for more information.)
Enter "System" menus, then proceed
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
A
PRESS MENU
BUTTON
B
USE ARROWS TO
"SYSTEM"
C
PRESS "ENTER"
1
USE ARROWS TO MENU
"USER ENTRY CODE"
2
ENTER TO EDIT
3
USE ARROWS TO
CHANGE
4
ENTER TO SAVE
5
USE ARROWS TO MENU
"USER CODE ENABLED"
6
ENTER TO EDIT
7
USE ARROWS TO
CHANGE
8
ENTER TO SAVE
MENU TO EXIT, PRESS
& HOLD TO STATUS
1
-
O
pe
ra
tion
Summary of Contents for TropiCal T170
