BATHROOM
CEILING JOISTS
FLOOR
BATH
SPILL
OVER
LEVEL
HOSE
RETAINING
RING
DOUBLE POLE SWITCH CEILING MOUNTED
GENERAL LAYOUT OF A SHOWER INSTALLATION
A TYPICAL INSTANTANEOUS ELECTRIC
SHOWER INSTALLATION
Plan your own installation carefully. Check on the
nearest and most readily accessible rising mains
water supply, this may be beneath the bath or in
the loft, where it feeds the cold water storage
tank. Use only the cold rising water main supply.
Do not connect the shower unit to the outlet from
the cold water tank.
Avoid connecting the shower unit, if possible,
where it will be affected by water drawn off by
other appliances, e.g. From the mains feed to the
W.C. This may cause a drop in pressure too low
for the shower unit to work correctly.
An isolating valve must be fitted to comply with
water regulations and for servicing purposes.
ISOLATING
STOP TAP
DOUBLE POLE
HEATER SWITCH
WALL MOUNTED
IN ACCORDANCE
WITH LOCAL
AUTHORITY
REGULATIONS
COLD WATER
MAINS SUPPLY
SEPARATE PERMANENTLY
CONNECTED SUPPLY
FROM CONSUMER UNIT
IMPORTANT
This appliance is not intended for use by persons (Including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
