OPERATING THE SHOWER
1. Switch on electrical supply - pull cord or wall mounted switch.
2. Press the ON / Off Button to start the flow of water.
3. Turn the divertor handle
to select the showering
function you require
Left for Hand-shower
& Right for Overhead.
4. When turning the Volume
Control Handle, this will
change the output
temperature of the water.
5. In the winter months,
the heater should be operated
at full power ( 9.5 KW )
to ensure an adequate amount
of hot water
In the summer months,
the ECO button can be activated
which will reduce the KW output
down to 5.0 KW.
6. To turn off the shower unit,
press the ON / OFF button.
IMPORTANT NOTES
The Higher the flow the temperature will decrease.
The Lower the flow the temperature will increase.
It is recommended that you start the shower with the volume handle in the fully
anti clockwise / cold position as this will provide maximum flow
If a higher outlet temperature is required, Rotate the volume handle in a clockwise direction.
Divertor handle
Hand-shower
Or overhead function
Volume Control Handle
On / Off Button
Winter 9.5 kw and
Summer 5.0 kw Setting
Full power /
Eco power button
Temperature and
Power Setting Indicator
In Winter Mode :
Both Half Circles are Lights up
In Summer Mode :
Only the bottom Half Circle
Lights up
