Aquaavia SWIMSPA, User And Installation Manual

Page: 19 / 34

User’s and installation manual SWIMSPA – FITNESS POOL English
41902E 20 EN-V00
SCREEN AND DIAGNOSTIC MESSAGES OF THE PANEL
The screen of the main panel shows the water temperature and the state of other functions, like:
- The running mode, showing
“ Standard ”, “ Economy ” or “ Sleep ” .
- The Ozone activation with the symbol “ O3 ”.
- The pumps and components that are activated, like:
Icon of massage Pump ON.
Icon of Air Blower ON.
Icon of Light ON.
Icon of Heater ON.
Diagnostic messages of the panel
MESSAGE MEANING ACTION REQUIRED
No message on screen.
Power supply to the Spa has
been cut. The control panel will be disabled until power
returns. The time must be set at each start-up.
Other programme settings are preserved.
OHH / HTR
TEMP LMT “Overheating” – The Spa has
shut down. One of the sensors
has detected 118ºF (approx.
47.8ºC) in the heater. DO NOT ENTER THE WATER. Remove the spa
cover and allow water to cool. Once the heater
has cooled, reset by pressing any button. If spa
does not reset, switch off the power supply to
the spa and call your dealer or maintenance
service.
OHS / SPA
TEMP LMT “Overheating” – The Spa has
shut down. One of the sensors
has detected that the Spa
water is 110ºF (approx.
43.3ºC). DO NOT ENTER THE WATER. Remove the spa
cover and allow water to cool. At 107 ºF
(approximately 41.7 ºC), the spa should
automatically reset. If spa does not reset, switch
off the power supply of the spa and call your
dealer or maintenance service.
ICE /
FREEZE
COND “Ice” – Potential freezing
conditions have been detected. No action required. The pumps and the blower
will automatically start up regardless of spa
status. If the pump does not work in this
situation, empty the Spa and contact your
authorised dealer or Technical Assistance
Service.
SnA /
SENSOR A
SERVICE
RQD Spa is off. The sensor plugged
into Sensor “A” jack is not
working. If the problem persists, contact your dealer or
maintenance service. (The message may appear
briefly in situations of overheating and
disappear when the spa cools).
SnB / Spa is off. The sensor plugged If the problem persists, contact your dealer or