User’s and installation manual SWIMSPA – FITNESS POOL
English
41902E 10 EN-V00
ELECTRICAL REQUIREMENTS &
CONNECTION
All Fitness Pools must be wired in accordance
with all local & national electric codes. Always
use a qualified electrician to perform the
electrical installation.
Please reference the wiring diagram that is
specific to your Fitness Pool’s Control
System:
x
Standard Swim Pool Control System.
Electrical input of 32A, 230V Single
Phase.
220/240 Volt installation
Use only a qualified Licensed Electrician to
make 240 Volt electrical installations.
Your 220/240 Volt Fitness Pool requires a
fused and dedicated 32AMP electrical circuit
and a minimum supply wire size of 10 mm. It
is important that these circuits are dedicated
(not being used by any other electrical
appliance) or your Fitness Pool may not
function properly.
In the Sheet of Electrical Specifications
attached at the end of this manual you can
consult the total power consumption of the
spa with the different configurations.
To determine the section of the electrical
wires the values are in kW that are reflected
in the above Sheet and the following table:
kW required
2,1 2,5 2,8 3,2 3,5 4,4 5,3 6,2 7,0 7,9 8,8
Nominal section of wires in mm
2
6 – 11 m
2,5 2,5 2,5 2,5 4
4
6 10 10 10 10
11 - 15 m
2,5
2,5
4 4 4 6 6 10
10
10
10
Dist
ance
15 – 20 m
4 4 4 6 6 6 10
10
10
16
16
Table of relationship between sections, distance and power requirement.
Wiring diagram
J1 - 2 Spd P1: Masaje Pump 1
J2 - Circ Pump: Circulation Pump
J3 - Blower: Air pump
J5- 1Spd P2: Massahe Pump 2
J9 - Ozone
J12 – Spa light
ESQUEMA DE CONEXIONES
Summary of Contents for SWIMSPA
Page 1: ......
Page 2: ...SPECIFICATIONS ESPECIFICACIONES SPEZIFIKATIONEN SPÉCIFICATIONS CARATTERISTICHE SPECIFICAÇÔES ...
Page 33: ......
Page 34: ......
