Aquaavia SWIMSPA, User And Installation Manual

Page: 15 / 34

User’s and installation manual SWIMSPA – FITNESS POOL English
41902E 16 EN-V00
the display will show the spa temperature and
“TL”.
Unlocking the temperature only
Press the “ Warm ” o “ Cool ” button then “ Time ”
and after “ Jets 1 ” then “ Cool ”. The “TL” symbol
will disappear and the control pad buttons will
work again.
Ozone generator
Your Fitness Pool is equipped with a Ozone
generator. This will automatically start up
whenever the filtration system in your pool is
functioning. Whenever the Ozone system is
functioning the symbol
”O
3
“
will be displayed
in the display panel.
Automatic filter cycles
Your Swimspa will automatically filter itself for
a 2-hour period every 12 hours. The first filter
cycle will begin at 8:00 AM and will continue
until 10:00 AM. The second filter cycle will
begin at 8:00 PM and will continue until 10:00
PM. When a filter cycle is active, it will be
indicated on the display with a message
stating
“F1” for the first (AM) cycle or “F2” for
the second (PM) cycle. During filtration, the
filter pump and ozone sterilizer (if installed)
will run.