Starting the System
The Leaf-B-Gone system is activated whenever
the pool pump is turned on.
•
If a valve is installed on the Leaf-B-Gone
supply line, it should be fully open.
Adjusting the Discharge Flow
The louvered fitting on the Leaf-B-Gone return
line can be adjusted to direct water flow.
To optimize cleaning, position the fitting to
discharge water towards the skimmer.
Adjusting the Floor Canister
The floor canister post extends approximately
1/4” above the cover of the drain at installation.
To adjust the post height, use the Head Removal
Tool (part# 3-17-8) attached to the end of a pool
service pole.
•
Insert the tabs of
the tool into the slots
on the drain post.
•
Turn counterclock
-
wise to raise the
drain for larger debris
like leaves or clock-
wise to lower it.
Leaf-B-Gone™
Quick Reference Guide
Operation/Maintenance
The Leaf-B-Gone in-floor cleaning system uses clean, filtered water to clear dirt and debris from swim-
ming pools and spas. Utilizing the pull created by a high-pressure venturi nozzle inside the canister, the
Leaf-B-Gone draws leaves and debris from the pool bottom through a plumbing line connected to the
Leaf-B-Gone floor canister. Clean water is returned to the pool through a specialized fitting that directs
flow to improve pool skimmer efficiency.
Skimmer
Floor Canister
Drain Line
Return
Line
Supply
Line
Operation
